From Petal to Porch

As the world seeks to become more eco-friendly, dual-flush toilets have become a popular choice among homeowners, as they save water and ultimately, money. These units come with two flush options, one for liquids and one for solids, which is an effective way to reduce your household's water usage. In today's post, we'll be sharing some pro tips for installing a dual-flush toilet in your home.

Before beginning the installation process, it’s important to gather all necessary tools and materials. This includes a new dual-flush toilet, wax ring, bolts, water supply line, and a toolkit. You may also require a tube cutter if you need to adjust the length of the water supply line. Having everything on hand will make the installation process smoother and faster.

The first step in the process is removing the old toilet. Start by turning off the water supply, then flush the toilet to drain the water from the tank and bowl. Next, disconnect the water supply line from the tank, and remove the nuts from the bolts that are holding the toilet onto the floor. Once this is done, you can lift the toilet off the bolts and move it out of the way.

With the old toilet removed, you can now install the new one. Start by setting the wax ring onto the flange on the floor, lining it up with the holes for the bolts. Next, set the toilet onto the wax ring, making sure the mounting bolts pass through the holes in the base of the toilet. Once the toilet is in place, you can tighten the nuts onto the bolts to secure the toilet to the floor.

Now it's time to attach the tank to the bowl. This process may vary depending on the model of toilet you have, but usually involves setting the tank onto the bowl and securing it with bolts. It's important to not overtighten these bolts, as it could crack the porcelain.

Next, you'll need to connect the water supply line to the tank. If the existing water supply line is too long or short, you may need to cut it to the correct length using a tube cutter. Once the line is the correct length, you can connect it to the fill valve on the bottom of the tank. Again, be careful not to overtighten, as this could cause leaks.

Once the water supply line is connected, you can turn the water supply back on. Check for any leaks around the base of the toilet and at the water supply line. If you find any, you may need to tighten the nuts a bit more. Finally, flush the toilet a few times to make sure everything is working properly.

Installing a dual-flush toilet is a relatively straightforward process, especially if you're replacing an existing toilet. However, if you're not comfortable doing it yourself, it's best to hire a professional. Whether you choose to DIY or hire a pro, a dual-flush toilet is a great investment that will save you money on your water bills and help conserve one of our planet's most precious resources.

DIY Home Repairs